Original ADI ADL5506ACBZ 45dB RF Detector, Supply ADI RF Power Detectors
Shenzhen Mingjiada Electronics Co., Ltd.——Long Term Supply ADI (ADL5506ACBZ) 30MHz to 4.5GHz, RF Power Detectors, Below are the product details for ADL5506ACBZ:
ADL5506ACBZ——Basic Information:
Part Number: ADL5506ACBZ
Package: WLCSP-6
Type: RF Power Detectors
Product Details: ADL5506ACBZ——30MHz to 4.5GHz, 45dB RF Power Detectors.
Product Attributes Of ADL5506ACBZ
Frequency: 30MHz ~ 4.5GHz
RF Type: General Purpose
Input Range: -45dBm ~ 5dBm
Accuracy: ±1dB
Voltage - Supply: 2.5V ~ 5.5V
Current - Supply: 3.8 mA
Mounting Type: Surface Mount
Package / Case: 6-XFBGA, WLCSP
Supplier Device Package: 6-WLCSP (0.76x1.36)
ADL5506ACBZ is a complete, low cost subsystem for the measurement of RF signals in the 30 MHz to 4.5 GHz frequency range, with a typical dynamic range of 45 dB, intended for use in a wide variety of wireless terminal devices.
ADL5506ACBZ provides a wider dynamic range and better accuracy than is possible using discrete diode detectors. In particular, its temperature stability is excellent over −40°C to +85°C.
ADL5506ACBZ's high sensitivity allows measurement of low power levels, thus reducing the amount of power that needs to be coupled to the detector. ADL5506ACBZ is essentially a voltage responding device, with a typical dynamic range of 45 dB.
Features Of ADL5506ACBZ
Complete RF detector function
Typical dynamic range: 45 dB
Frequency range from 30 MHz to 4.5 GHz
Excellent temperature stability
Stable linear in decibel response
Power on/off response time: 65 ns/145 ns (rise/fall)
−5 dBm input power applied
Operates from −40°C to +85°C
Low power: 3.8 mA at 3.0 V
Power supply voltage range from 2.5 V to 5.5 V
Disable current <1 µA
Applications Of ADL5506ACBZ
RSSI and TSSI for wireless terminal devices
RF transmitter or receiver power measurement
Automotive RF bidirectional amplifiers
ADL5506ACBZ——For convenience, the signal is internally ac-coupled, using a 5 pF capacitor and a broadband 50 Ω match, with an external shunt resistor of 52 Ω. This high-pass coupling, with a corner at approximately 19 MHz, determines the lowest operating frequency. Therefore, the source can be dc grounded.
ADL5506ACBZ output increases from approximately 0.14 V to a little over 1 V as the input signal level increases from 1.25 mV rms (−45 dBm) to 224 mV rms (0 dBm). The output is proportional to the logarithm of the input power level; that is, the reading is presented directly in decibels and is scaled about 18 mV/dB at 900 MHz. A capacitor can be connected between the VLOG pin and the CFLT pin when it is desirable to increase the time interval over which averaging of the input waveform occurs.
ADL5506ACBZ is available in a 6-ball WLCSP and consumes 3.8 mA from a 3.0 V supply. When powered down, the typical disable supply current is <1 µA.
ADL5506ACBZ——Functional Block Diagram:
[Mingjiada Electronics] Long Term Supply ADI (ADL5506ACBZ) RF Signals Measurement, For more product information about ADL5506ACBZ or to inquire about pricing, please visit the official website of Mingjiada Electronics (https://www.integrated-ic.com/).
Contact Person: Mr. Sales Manager
Tel: 86-13410018555
Fax: 86-0755-83957753